United States of Magnets

The Puzzle

   Mr. Hulse and I were spring cleaning when we stumbled upon this United States puzzle. Some of the puzzle wasn't looking so great and Florida was missing. We tried to clean it up but it was beyond saving. THAT being said, some of the pieces were in great condition. And we decided to save some of the States to upcycle them into magnets!

I cleaned and dusted the pieces very carefully. With my trusty glue gun I attached a magnet to each state. (I had some magnets from a previous project and luckily they fit!) Here are the photos from the project. A few of these I'm keeping or giving to friends...but the rest will be up in the Etsy shop!

The salvaged pieces

States!

My Tools

Adding some glue!

Drying 

They came out looking so fun. New York and New England went right up on the fridge!

They fit right in!

Necktie Rabbit Ears

   

 Have you ever been to Books of Wonder on 18th st. between 5th and 6th? Well, it is one of the cutest children's bookstores. I performed there on Saturday as the March Hare in Alice in Wonderland with Haberdasher Theater. I was very excited to work on my costume and put together some inspiration on Pinterest and Tumblr. I was wondering how I would get my hands on some ears UNTIL the director handed me a pair of ties to add to my costume. When I looked at those ties... I saw ears!                     

 Necktie Rabbit Ears

What you'll need-

2 Neckties

1 Headband

Glue Gun and Glue

Strong Wire

Wire Cutter

Scissors

Pen, Chalk or Fabric Marker

Seam Ripper

I bought two matching neckties from a thrift store. I picked very long ties for the extra fabric. I used materials that I had around the house for assembling these, but you could get as high or low tech as you desire. I made these ears quite quickly and took lots of photos!

First decide how long you would like the ears and cut! I cut them a little bit longer than I wanted them in case of error and for attaching. We are using the Front end of the tie for the ears.

With the small back end of a tie I covered my pink H&M headband. Great thing about this tie

was that I could just slip it on!

I hot glued one side of the necktie at the end for a secure fit. 

I left the other side free in case of error.

Next I wired the ears. I measured out a length of wire and trimmed it. I then threaded the wire through each ear. There are two ways to do this and I tried both. The tie lining allowed me to show the wire in the back or to not show it (keeping it hidden within the lining of the tie). I hot glued both into place.

Attaching the ears to the headband was the hardest part. 

With a marker I noted where the wire would attach and proceeded to rip the seams of the tie attached to the headband. I then pulled the ears through and was able able to twist them around the headband to keep them secure. I finished up with some hot glue on the wires and to seal up the headband.

And Ta Da! Here is how they turned out. 

What do you think??