Monday, November 21, 2011

Necktie Rabbit Ears

   

 Have you ever been to Books of Wonder on 18th st. between 5th and 6th? Well, it is one of the cutest children's bookstores. I performed there on Saturday as the March Hare in Alice in Wonderland with Haberdasher Theater. I was very excited to work on my costume and put together some inspiration on Pinterest and Tumblr. I was wondering how I would get my hands on some ears UNTIL the director handed me a pair of ties to add to my costume. When I looked at those ties... I saw ears!                     



 Necktie Rabbit Ears

What you'll need-

2 Neckties
1 Headband
Glue Gun and Glue
Strong Wire
Wire Cutter
Scissors
Pen, Chalk or Fabric Marker
Seam Ripper



I bought two matching neckties from a thrift store. I picked very long ties for the extra fabric. I used materials that I had around the house for assembling these, but you could get as high or low tech as you desire. I made these ears quite quickly and took lots of photos!


First decide how long you would like the ears and cut! I cut them a little bit longer than I wanted them in case of error and for attaching. We are using the Front end of the tie for the ears.




With the small back end of a tie I covered my pink H&M headband. Great thing about this tie
was that I could just slip it on!







I hot glued one side of the necktie at the end for a secure fit. 
I left the other side free in case of error.



Next I wired the ears. I measured out a length of wire and trimmed it. I then threaded the wire through each ear. There are two ways to do this and I tried both. The tie lining allowed me to show the wire in the back or to not show it (keeping it hidden within the lining of the tie). I hot glued both into place.



Attaching the ears to the headband was the hardest part. 
With a marker I noted where the wire would attach and proceeded to rip the seams of the tie attached to the headband. I then pulled the ears through and was able able to twist them around the headband to keep them secure. I finished up with some hot glue on the wires and to seal up the headband.


And Ta Da! Here is how they turned out. 

What do you think??




1 comment: